True modular uninterruptible power supply, scalable from 50kW up to 1.5MW, for medium power applications in critical, high-density computing environments such as small to medium-sized data centres, plus industrial automation processes and healthcare facilities. The PowerWAVE 9250DPA offers the best reliability for environmentally conscious organisations that also need zero downtime and low cost of ownership.
Independently certified as the most energy efficient UPS on the market today, the PowerWAVE 9250DPA has been designed specifically for medium-sized data centres and boasts not only the lowest cost of ownership in its class, but also delivers energy efficiency in true online mode, across a broad spectrum of loads. The high-level efficiency provides top-of-the-market performance and can reduce operational costs and help to minimize environmental impact.
High efficiency reduces total cost of ownership (TCO)
The superior level of UPS module efficiency reduces energy losses that create pure costs as direct electricity spend and costs for cooling, achieving low cost of ownership. Thanks to three-level interleaved technology, the PowerWAVE 9250DPA achieves an efficiency of over 97% in a wide operating range, when the load is between 25 and 75 per cent of nominal capacity.
An intelligent feature that minimises loss and improves efficiency when running in double conversion mode. With Xtra VFI mode enabled, the UPS automatically adjusts the number of active modules according to the load requirements. Modules that are not needed are switched to standby but remain in a state of readiness, primed to kick in and transfer to active mode if the load increases or the mains fails. The efficiency improvements are essentially significant when the load is less than 25% of full capacity. Find out more and see an example.
Up to six 300kW frames and up to 30 modules can be paralleled for an amazing 1.5MW of uninterrupted power. Secure ring-bus communication ensures there is no single point of failure in the system.
Maximised Availability with Decentralised Parallel Architecture
Decentralised Parallel Architecture (DPA) means each UPS module contains the hardware and software required for full system operation. They share no common components so a DPA parallel system offers extremely high availability. In addition, potential single points of failure are eliminated and system uptime is maximised. UPS modules can be paralleled to provide redundancy (parallel redundancy) or to increase the system’s total capacity.
Fast and secure to maintain
Maintenance is fast and secure thanks to a well thought out electrical and mechanical scheme that reduces the scope for human error. The UPS modules have virtually no wiring and he circuit boards and internal components have been positioned in such a way that consumable parts that may require replacement during service life are easily extractable – making servicing safer and faster. It can take as little as 10 minutes to extract a module, replace the consumable parts, insert it back to the system and turn it back online.
The system graphical display provides a clear system overview, system level commands, measurements and system status, navigation into module level, and module level measurements and status. The module display allows for easy module-level data access and module management.
|Actual kW / MW|
50kW – 1.5MW
|Standalone / Modular|
|Parallelable up to|
30 x modules ( 5 x UPS units)
|Rated output voltage range|
380 / 400 / 415V
Online double conversion
|Input current distortion THDi @100% load|
Data Centres, Airports, Commercial buildings and general IT, Healthcare Facilities, Railway signaling applications