KUP’s 24/7 remote monitoring system for all makes and sizes of standby generators.
The all new Generator Remote Monitoring System is much more than just a piece of communications hardware fitted to your generator. KUP’s Generator Monitoring system is an industry leading, monitoring, management and fault rectification system integrating the latest GSM communications technology with the best 24/7 generator support personnel anywhere in the world.
Once a week the monitoring system automatically starts your generator and runs it for 10 minutes, checking vital operating parameters such as voltage, frequency, oil and water temperature, battery condition, emergency stop and fuel levels. After the test, a full condition report is sent to the monitoring centre via phone line or GSM upload. You can also choose to receive SMS or voicemail reports sent to nominated numbers.
If your standby generators are in action, or you’re using prime power generators equipped with the system, you get 24 hour monitoring, 365 days a year.
• Fully automatic operation 24/7
• Continuous monitoring of generator conditions
• Notification of mains failure and generator operation
• Confirmation of a successful test run
• Automatic low fuel warning.
Based on a common platform, the system can be fitted to new or existing generators and programmed to monitor a huge range of parameters including;
Electrical – voltage, current, frequency of generator and mains power
Mechanical – engine data including speed, oil pressure, and temperature
Physical – location of the generators using the GPS network
Remote Control – test running, fuel levels, alarms and alerts
Site Specific Requirements – intruder alarms, fire alarm, etc.