Pharmaceutical and Biotechnology

Our range of UPS, generators and emergency lighting products as well as proven combination of experience, and support has earned our trusted position in a wide range of pharmaceutical and biotechnology applications.

At KUP we understand that the key challenges in pharmaceutical and biotechnology applications power protection include:

  • Meeting strict, multiple compliance and regulatory regimes.
  • A need for flexibility over a facility’s lifetime due to evolving technologies and techniques, e.g. yield increases, single use innovations, and modular production pods.
  • Space, floor loading and noise restrictions for location of power equipment”. If necessary trim off the eg when mentioning the flexibility on the prior challenge.

Our UPS systems range from modular three-phase units through to standalone models and compact single-phase UPS and UPS designed to handle regenerative loads from lifts.

Complementing these are kite-marked, performance-tested static inverters for emergency lighting systems and a range of compact, quiet and efficient generators, which complete the portfolio, whilst our own team of engineers are there to support them nationwide, 24/7, 365 days a year.

To discuss how we can help you find a solution specific to your requirements contact us at uksales.ups@kohler.com or call us on 0800 731 3269

Pharmaceutical and Biotechnology

Related Products

  • PowerWAVE 5000/TP 60-500kVA (Stand-alone 10-50kVA)

    PowerWAVE 5000/TP

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    10-50 kVA
    10-50 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Standalone three-phase UPS system available in seven power ratings from 10 to 50kVA and in different
    Read moreCompare

  • PowerWAVE 6000

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    60-500 kVA (500kW)
    60-500 kVA (500kW)
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Transformerless 3 phase UPS from 60 kVA to 500 kVA, parallelable up to 5 MVA. Offering both intellig
    Read moreCompare

  • PowerWAVE 8000DPA

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    10-200 kVA per frame
    10-200 kVA per frame
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Modular
    Modular
    UPS systems such as the PowerWAVE 9000DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    Three-phase UPS built for low to medium, high density power protection applications. Leading-edge mo
    Read moreCompare
  • PowerWAVE 9250DPA

    PowerWAVE 9250DPA

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    Modular
    Modular
    UPS systems such as the PowerWAVE 9000DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    True modular uninterruptible power supply, scalable from 50kW up to 1.5MW, for medium power applicat
    Read moreCompare
  • PowerWAVE 9500DPA (Modular 100-500kVA)

    PowerWAVE 9500DPA

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    100-500 kVA
    100-500 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Modular
    Modular
    UPS systems such as the PowerWAVE 9000DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    Innovative 5 x 100kW modular UPS system offering pay-as-you-grow scalability combined with 99.9999%
    Read moreCompare
  • PowerWAVE 3000TP (10-20kVA)

    PowerWAVE 3000/TP

    Single phase
    Single phase
    A single-phase installation consists of a single sine wave input and is typically a single phase of a larger three phase supply. A typical example of this would be a local three pin UK socket which uses 230/240 VAC to supply power. Most small power hardware including rack-mounted servers, telecoms, network switches, computer systems or any device running from a standard three pin UK plug, operate from a single phase supply.    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    10kVA & 20kVA
    10kVA & 20kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    One of the most compact single phase UPS systems delivering critical power protection of up to 80 kV
    Read moreCompare
  • PowerWAVE 1000

    PowerWAVE 1000

    Single phase
    Single phase
    A single-phase installation consists of a single sine wave input and is typically a single phase of a larger three phase supply. A typical example of this would be a local three pin UK socket which uses 230/240 VAC to supply power. Most small power hardware including rack-mounted servers, telecoms, network switches, computer systems or any device running from a standard three pin UK plug, operate from a single phase supply.    1-10 kVA
    1-10 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Rackmounted
    Rackmounted
    Designed to fit industry-standard-sized computer racks and cabinets (19" wide).    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Single phase UPS system for server, network, VoIP and telecommunication applications. Combines high
    Read moreCompare
  • MINIPower PLUS (1.25 -10kVA)

    MINIPowerPLUS

    Single phase
    Single phase
    A single-phase installation consists of a single sine wave input and is typically a single phase of a larger three phase supply. A typical example of this would be a local three pin UK socket which uses 230/240 VAC to supply power. Most small power hardware including rack-mounted servers, telecoms, network switches, computer systems or any device running from a standard three pin UK plug, operate from a single phase supply.    1-10 kVA
    1-10 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Flexible tower or rack-mounted UPS system with a unique scalable design featuring easy to replace mo
    Read moreCompare
  • PowerWAVE K Series Generator

    PowerWAVE K Series

    Single phase
    Single phase
    A single-phase installation consists of a single sine wave input and is typically a single phase of a larger three phase supply. A typical example of this would be a local three pin UK socket which uses 230/240 VAC to supply power. Most small power hardware including rack-mounted servers, telecoms, network switches, computer systems or any device running from a standard three pin UK plug, operate from a single phase supply.    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    6-44 kVA
    6-44 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Reliable series of single and three phase standby generators from 6kVA to 44kVA. Each generator is b
    Read moreCompare
  • PowerWAVE V Series Generator

    PowerWAVE V Series

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    220-700 kVA
    220-700 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    High specification range of UPS generators providing ‘turnkey’ backup power with APM403 control pane
    Read moreCompare
Top

Pin It on Pinterest

Share This